Entertainment Center — 3 ways

I always seem to have some sort of little project going on.  Actually…..it’s more like a FEW projects going on and I work on one here a little and another a little…and eventually they all get done.  I guess it just kind of depends on what my mood is or what the kids are up to.  They kind of dictate where I am so I usually work on whatever is in the vicinity of where they are.

Here’s a piece that I bought for $20 at a garage sale and re-purposed TWICE 🙂

An old entertainment center — everyone is trying to get rid of these, these days.  NOONE has those big tube TVs anymore.  You can find these just about anywhere you go (Goodwill, Salvation Army, the curb, you name it).


I tried to re-purpose this as best as I could and really liked how it turned out.  It sat on our back patio for a couple of years like this and stored the cat and dog food in the cabinets and the baskets are where the cats slept.  They loved their warm, hay-filled baskets.

I absolutely love chalk paint and one of my favorite brands is CeCe Caldwell.  I painted this piece in Destin Gulf Green (although it looks more like a soft aqua than green) which is one of my favorite colors in that line.  I usually get it from Magnolia Lighting, the closest retailer of this particular chalk paint line.  Plus, I just love going in there and seeing what new things they have and getting design inspiration.  So why is it one of my favorite brands of chalk paint?  Numerous reasons!

– It’s about half the cost of the other well-known name brand of chalk paint out there that is its main competitor (don’t want to say anything negative about other lines so I choose not to say the brand).

– It’s very thick so a little bit goes a very long way.  I used about half a quart when painting this piece.  And a quart runs about $35.

– They are all-natural and non-toxic <<read about it here>>.

– They are made in the USA

– They are mineral paints that contain no potentially harmful or toxic ingredients (e.g. nonyl phenol ethoxylats, APEO, formaldehyde, ammonia, ethylene glycol or acrylic co-polymers) and are packaged in recycled plastic containers.

– They do not contain any ingredients that have to be listed on the label as hazardous under the California Prop 65 law.

After a couple of years, I decided to re-purpose this piece and sell it (I had a booth in a local indoor marketplace).  It stayed the Destin Gulf Green color, but I took out the painted glass from the top cabinets and replaced it with some old rusty tin and also put tin on the back to be able to store and display any items where it was originally meant for a TV to sit with a neat contrasting back.


I always get decorative knobs from Hobby Lobby.  They have the neatest selection and they are 50% off every other week.  So if they’re not on sale when I want them I simply wait until the next week and go in and get them half off ;).  I love a sale!

This piece sold after only a couple of days in the booth and I hope the new owner loved the end result as much as I did.


Paver Path

This project.  THIS project!!!  Did not result in a divorce.  Hallelujah.  By far the longest and hardest laborious job we’ve ever taken on.  But when we got a quote for the paver path we wanted to do, it was insane!  And that was even from the guy who was supposedly the cheapest around.  So what did we do?!!?  We went and bought a wet saw (a fantastic one from Harbor Freight…was very budget friendly and did everything we wanted it to do…..<<check it out here>>).

When I suggested we do it ourselves, my husband just looked at me with fear….the kind of look that says “honey…..do you really think that’s a good idea????”.  LOL.  Because we are wired completely different.  No joke!!!  He doesn’t really pay that much attention to minute details where I do and I know he was thinking he’d rather pay someone else to screw it up than him screw it up.  I’m a bit of a stickler to details.  I can’t help it…..it’s just the way that God made me :).  But I just knew we could figure out a system and get it done.



Can I just tell you how brutal it was to dig all of this with a flat head shovel?  I finally got to the point where I had my husband ask our neighbor to ride over with his backhoe and he literally had it dug and leveled within 30 minutes.  MAN heavy equipment amazes me!!!!!  Now on to the pavers……


I locked arms with this amazing lady at General Shale up in Memphis when we were building our house that was absolutely amazing.  She is the golden unicorn for any kind of brick or paver question.  <<Katie Yokie…..you rock!!!!>>  Our house brick is shown on the floor and all the paver options on the wall.    I loved the top left but thought it might be too much white since most of the house is white.  So we decided on the bottom left for a little bit of a contrast…but not too much.



Hello paver delivery guy!  Worth every bit of that $50 fee.  When building our house, we tore the transmission out of our SUV by hauling flooring.  Not this time!!!  And he was even nice enough to drop a palette every 15 feet so we wouldn’t have to haul them around as much.  So nice!!


Want to know how to effectively measure out a 3″ paver base and make sure it’s right?  Lay down a 3″ diameter PVC pipe and just lay the base material until it hits the top of it.  Pretty simple.  Move the pipe down the walk and keep going.  Pretty high tech, huh??  We try to get things done the easiest way around here ;).  We compacted the paver base with a plate compactor that we rented from Home Depot that was awesome and had it all done in about 45 minutes!!!!  Then we followed that by about an inch of sand before laying the pavers down.

And here we go……..


We managed to get a system down that in the end we were pretty proud of.  The straight shots were simple, but the bends were a bit tricky.  So I numbered each brick that needed to be cut, marked the cut, handed it to my husband and he ran the saw and made each cut and handed it back to me for placement.  It was a bit tedious but it worked with no arguments.  Praise the Lord!!!!



We chose not to take on the extra challenge of using mortar, but rather chose to fill in the cracks with Polymeric Sand (also called Paver Set) from Lowe’s —> check it out here.  You sweep it in the cracks, spray it down with water and it hardens to lock the pavers in place.  Super simple and looks very nice.  Very happy and proud of the end result!

Sweeping in the polymeric sand (paver set):


And ta-da!!!!!  The end result……SO proud of ourselves!!!!  Now our guests don’t have to wear mud boots to come visit 🙂



Want to take on a paver path project of your own?

Here is a step by step go by and list of materials and tools you will need:

  1. Mark out your paver path location in the grass (I used a bright orange marking paint to mark it and extended that by an extra 6″ on each side so I wouldn’t be working in too tight of conditions).
  2. Dig out the path to the required depth (taking into account the paver base material thickness…..we used 3″ of paver base material, 1″ sand, and the paver was 3″) with a flathead shovel OR find you a super nice neighbor with a backhoe to come dig it for you in about 30 minutes.
  3. Lay down the 3″ of paver base material (we used a fine crushed limestone) and compact with a vibratory compactor (we rented a 20″ Vibratory Plate Compactor from Home Depot that worked like a charm and was worth every penny).  Keep in mind that you never want to compact more than 4″ of material at a time or else it will only compact the top 4″ and will leave the remaining material on the bottom to settle and cause issues down the road.  You can also sprinkle your paver base material with water to help the compaction process and minimize dust flying up during compacting.
  4. Lay the sand over the compacted paver base material. DO NOT COMPACT the sand.  This is a common mistake. When you lay the pavers down you will hand tamp them into the sand and the loose sand will be forced up between the pavers to set and secure them.
  5. Begin laying the pavers, making all necessary cuts with the wet saw (this is the one we used that worked great) for placement.  I used a mallet to tamp the pavers into the sand.
  6. This is optional, but we used an anchored paver edging system (check it out HERE) from Home Depot that anchors into the ground to hold the pavers exactly where you want them so they don’t shift.  We might not have needed them since we had soil compacted on both sides of the path, but it kept me happy knowing they would never be able to shift or move from their location.
  7. We chose to use Polymeric Sand rather than mortar on our path and we have never regretted not using mortar.  And it was so much easier to work with!  Pour the polymeric sand all over the pavers and brush it all into the cracks with a shop broom.
  8. Using a water hose, sprinkle the paver path down (don’t drench it…..just sprinkle enough to get the path completely wet so the polymeric sand will set).  The water causes the polymeric sand to harden and lock the pavers in place.
  9. Sit and marvel at your finished project and enjoy your amazing new paver path!!!!


Goat Pile to Den Wall

One of my all time favorite DIY projects was when I was about 6 months pregnant with our third child, it was freezing cold at Christmas time, but I knew it would have to go down while I was visiting my parents over the holidays or it just wouldn’t happen (since I needed my dad’s mad saw skills….didn’t want to attempt that with the big belly in the way…..as well as the cypress slats from his pile at the barn).  I had an idea in my mind of EXACTLY what I wanted it to look like, sketched it on paper for him with exact dimensions (yes, I’m type A…..but my dad couldn’t say much….I got it from him).


While dad got his tools prepared, I pretty much devoted my efforts to just sanding the goat poop off the cypress boards and loading wood in the old wood burning furnace in the shop to keep us warm.


Here it is coming to fruition.  I had to go back and forth with my dad a bit because he’s a tad old school and sees the historical aspect of things and I was only seeing the end product I wanted.  It was hard for him to cut the cypress boards from 12″ down to 10″ because he said in the olden days it was very rare to find a 12″ cypress slat come out of the sawmill.  But I finally talked him into it…..I wanted each board to be the exact same width and when I told him to give me the saw he gladly moved forward.  And no….I wasn’t going to get to work with that saw at 6 months pregnant.  I knew it would do the trick ;).

Dad sure was working hard……coming along very nicely and staying warm by that wood burning stove I might add.  My back couldn’t handle much more so at about 10:00pm I had to give Nana a break and go bathe the other kids, get them in bed and crash.  I woke up to find that dad had trimmed the edges out quite beautifully to give me an amazing piece, exactly like I wanted!!!


See the darker vertical spots on the third cypress board?  That’s where my dad once used that very same board as a ramp into his truck for my black lab that had hip problems and couldn’t jump up in his truck anymore.  I LOVE that the piece also holds sentimental value.  When picking out the boards, he grabbed that one and showed it to me and I knew immediately what it had been used for.  And I also love how you can see the blade marks on each board where the huge blade cut the boards as it ran through the sawmill decades ago.


TA-DA!!!!!  The finished product.

Can I just tell you how much I LOVE this piece ?????!!!!!!??????